Master Pure 2K Hardener

Número de artículo:

Endurecedor para lacas 2K

  • No tiene clasificaciones CLP.
  • Sin isocianato
  • Vida útil 48 horas
  • Easy to mix

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

This European standard specifies requirements for surfaces for indoor sports facilities.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

*La muestra de madera se muestra en roble
100 ML
Encontrar distribuidor

Detalles de producto

  • Descripción
  • Especificaciones
  • Ficha técnica
  • Ficha de datos de seguridad

Densidad:

0.95-1.00 g/ml.

Durabilidad:

3 años

Temperatura de aplicación:

+15-25°C y 50% de humedad del aire.

Rendimiento:

8-10 m²/L

Colores:

Incoloro

Limpieza de herramientas:

Limpiar con agua y jabón

Almacenamiento:

+10-25°C. Mantener fuera del alcance de los niños. No lo exponga al calor (por ejemplo, la luz solar directa). Almacenar evitando heladas en invierno y en lugar fresco en verano.

Envases:

100 ML

Vida útil:

La mezcla debe usarse en las siguientes 48 horas. Agite/remueva bien antes de usar.

Olor:

Olor leve

Proporción de la mezcla:

2% o 100 ml en 5 L de barniz.

Master Pure 2K Hardener es un endurecedor sin isocianatos altamente eficaz que activa y fortalece el barniz y es muy fácil de trabajar. Este producto no tiene clasificaciones CLP.

Pasos de trabajo

Instructions
Products in use
It is important that both wood and lacquer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards, using a tightly-wrung water-soaked mop/cloth. Please note: WOCA Intensive Wood Cleaner can help to remove contaminates from fully sanded wooden floors before priming or lacquering. Please allow floor to fully dry overnight. The floor must be completely dry before priming or lacquering. When priming, use WOCA Master Base Primer for newly sanded wood to reduce side bonding. Alternatively, try WOCA Master Multi Primer for exotic wood species or old wood previously treated with oil or wax.

Recuerde siempre hacer una prueba en un lugar poco visible, a fin de verificar la compatibilidad de la superficie con el producto.

Se technical Datasheet for waterbased lacquer for drying time and application.

Productos que necesitas

  • Master Invisible 2K Lacquer
    Invisible 2K Lacquer

    Barniz para suelos de madera con aspecto sin tratar

  • Lacquer Roller Waterbased
    Lacquer Roller Water-based

    For waterbased products

  • Paint Roller Holder
    Paint Roller Holder

    For applying oils and lacquers

Productos relacionados

Ver en la misma categoría

Telescope Stick

For optimum reach

Master Invisible White Additiv

Asegura un acabado más claro

Retarder for Lacquer

Prolonga la duración del envase abierto.