Panel White

Número de artículo:

Blanqueamiento de techos y paneles

  • Aspecto blanco intenso para paneles de pared y techos
  • Mantiene el veteado natural de la madera
  • Fácil de aplicar
  • Certificado de Interiores Saludables

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

This European standard specifies requirements for surfaces for indoor sports facilities.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

*La muestra de madera se muestra en pino
100 ML
2.5 L
Encontrar distribuidor

Detalles de producto

  • Descripción
  • Especificaciones
  • Ficha técnica
  • Ficha de datos de seguridad

Declaración:

Agua, dispersión de resina alquídica, pigmentos.

COV:

50 g/l, contenido máximo de COV (A/e (BA)): 130 g/l.

Densidad:

1.20-1.30 g/ml.

Valor de pH:

pH 7-8

Durabilidad:

3 años

Temperatura de aplicación:

+15-25°C y 50% de humedad del aire.

Rendimiento:

10-12 m²/L

Colores:

Extra Blanco

Limpieza de herramientas:

Limpiar con agua y jabón

Almacenamiento:

+10-30°C. Mantener fuera del alcance de los niños. No lo exponga al calor (por ejemplo, la luz solar directa). Almacenar evitando heladas en invierno y en lugar fresco en verano.

Envases:

2.5 L

Dilución:

Sin diluir

Olor:

Olor leve

Tiempo de secado:

2-3 horas a 20°C

Secado de la superficie:

1-2 horas a 20°C

Endurecido completo:

4-5 horas 20°C

Panel White es un producto con base agua para conseguir un aspecto blanco intenso de techos y paneles de pared de madera. Panel White es un producto con certificado de inetriores saludables, con base agua, que preserva el veteado natural de la madera.

Pasos de trabajo

Instructions
Products in use
La madera debe estar limpia y totalmente seca. Friegue con Intensive Wood Cleaner mezclado con agua en proporción de 1:40. Aclare con agua limpia. Cualquier resto de barniz suelto en superficies previamente barnizadas debe ser eliminado.

Recuerde siempre hacer una prueba en un lugar poco visible, a fin de verificar la compatibilidad de la superficie con el producto.

  1. La madera debe estar limpia y totalmente seca. Friegue con Intensive Intensive Wood Cleaner mezclado con agua en proporción de 1:40. Aclare con agua limpia. Cualquier resto de barniz suelto en superficies previamente barnizadas debe ser eliminado. Se recomienda efectuar una pequeña prueba con el producto en un área poco visible de la pieza para evaluar los resultados de su aplicación.
  2. Agitar vigorosamente Pintura antes de su uso.
  3. Aplique con una brocha una capa uniforme de este producto siguiendo longit­udinalmente la veta de la madera. No lo aplique en más de 3 o 4 paneles al mismo tiempo y cúbra­los totalmente para evitar solapamientos.
  4. Limpie las herramientas con agua y jabón.

Productos que necesitas

  • Intensive Wood Cleaner
    Prepare
    Intensive Wood Cleaner

    Preparación para tratamiento

  • Colour Tray
    Colour Tray

    For 250 mm paint rollers

Productos relacionados

Ver en la misma categoría

Panel White

Blanqueamiento de techos y paneles